The ML110 converter is mainly used in the water market, HVAC and in industrial applications where average requirements are needed. Accuracy: ± 0,8% of the read value (optional ± 0,4% of the read value). Repeatability: ± 0,2% With or without display. Programming through 3 internal keys or PC. Galvanic separation: all inputs and outputs are separated one each other and with the power supply. Housing material: Glass fibre nylon. Programmable functions: low flow rate cut-off, bidirectional, double range, peak cut-off, empty pipe detection, alarm limit and so on. It can be coupled with all Isomag sensors with the exception of the MS4000. For further information, please check the attached data sheet.


  • Sensor or Wall Mount
  • 3 Internal Programming Keys
  • 2-Line Alphanumeric LCD Display
  • 4-20 mA Output (opt.)
  • Pulse Output
  • Frequency Output
  • Alarm Output
  • Empty Pipe Detection
  • PC or internal pushbutton programming capability
  • NEMA 4X enclosure
  • 10-63VDC, 90-265VAC


Description Digital Converter
Enclosure Nylon with Glass Fiber
Opt. Aluminium Die Casting (pictured)
Display IP 65 / IP 67
Outputs / Inputs 1 current output
2 digital output max 1250Hz
Others on request (see additional modules)
Special Functions Bidirectional, Dual Range, Diagnostic, Empty Pipe
Power Supply 90-265Vac / 45-60Hz
10-63Vdc 15-45Vac / 45-66Hz
Accuracy class ± 0,8% (± 0,4% on request) of measured value
Repeatability ± 0,2%
Temperature –10…+50°C